D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
743
71-23 delete ipv6route redistribute dst ospfv3 src
Description
This command is used to remove the IPv6 route redistribution to stop importing route of other
protocol into OSPFv3.
Format
delete ipv6route redistribute dst ospfv3 src [local | static | ripng]
Parameters
local - Specify not to redistribute local routes into OSPFv3.
static - Specify not to redistribute static routes into OSPFv3.
ripng - Specify not to redistribute RIPng routes into OSPFv3.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To remove OSPFv3 route redistribution:
DGS-3120-24TC:admin#delete ipv6route redistribute dst ospfv3 src static
Command: delete ipv6route redistribute dst ospfv3 src static
Success.
DGS-3120-24TC:admin#

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)