D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
779
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To disable the LED admin state:
DGS-3120-24TC:admin#config led state disable
Command: config led state disable
Success.
DGS-3120-24TC:admin#
78-7 show led
Description
This command is used to display the setting of all port’s LED admin state.
Format
show led
Parameters
None.
Restrictions
None.
Example
To display the setting of all port’s LED admin state:
DGS-3120-24TC:admin#show led
Command: show led
Port LED State: Enabled
DGS-3120-24TC:admin#

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)