D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
834
DGS-3120-24TC:admin# delete vlan_translation ports 1:1-1:4
Command: delete vlan_translation ports 1:1-1:4
Success.
DGS-3120-24TC:admin#
83-10 show vlan_translation
Description
This command is used to display the existing C-VLAN-based VLAN translation rules.
Format
show vlan_translation {[ports <portlist> | cvid <vidlist>]}
Parameters
ports – (Optional) Specify a list of ports to be displayed.
<portlist> - Enter the list of ports to be displayed here.
cvid - (Optional) Specify the rules for the specified CVIDs.
<vidlist> - Enter the CVID value used here.
Restrictions
None.
Example
To show C-VLANs based on VLAN translation rules in the system:
DGS-3120-24TC:admin# show vlan_translation
Command: show vlan_translation
Port CVID SPVID Action Priority
----- -------- -------- ------- ---------
1:1 20 200 Replace -
1:1 30 300 Add -
Total Entries: 2
DGS-3120-24TC:admin#

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)