D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
853
Examples
This example shows how to reboot the device after 10 minutes and not to save the configuration
before doing so.
DGS-3120-24TC:admin# config reboot schedule in 10
Command: config reboot schedule in 10
Success.
DGS-3120-24TC:admin#
This example shows how to reboot the device at 1 September 2013 23:00 and save all
configurations before rebooting.
DGS-3120-24TC:admin# config reboot schedule at 23:00 01sep2013
save_before_reboot
Command: config reboot schedule at 23:00 01sep2013 save_before_reboot
Success.
DGS-3120-24TC:admin#
85-2 show reboot schedule
Description
This command is used to display the reboot schedule status.
Format
show reboot schedule
Parameters
None.
Restrictions
None.
Example
This example shows how to display the reboot schedule status.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)