D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
860
Parameters
vlan_name - (Optional) Specify the RSPAN VLAN by VLAN name
<vlan_name> - Enter the VLAN name here.
vlan_id - (Optional) Specify the RSPAN VLAN by VLAN ID.
<value 1-4094> - Enter the VLAN ID here. This value must be between 1 and 4094.
Restrictions
None.
Example
Display the specific settings:
DGS-3120-24TC:admin#show rspan
Command: show rspan
RSPAN : Enabled
RSPAN VLAN ID : 2
--------------------
Mirror Group ID : 1
Target Port :
Source Port
RX : 1:2-1:5
TX :
RSPAN VLAN ID : 3
--------------------
Total RSPAN VLAN :2
DGS-3120-24TC:admin#

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)