D-Link xStack DGS-3120 Series - Page 884

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
879
DGS-3120-24TC:admin#create route redistribute dst rip src ospf all metric 2
Command: create route redistribute dst rip src ospf all metric 2
Success.
DGS-3120-24TC:admin#
89-9 config route redistribute dst rip src (RI Mode Only)
Description
This command is used to update the metric to be associated with the redistributed routes from a
specific protocol to RIP protocol.
Format
config route redistribute dst rip src [local | static | ospf [all | internal | external | type_1 |
type_2 | inter+e1 | inter+e2]] {metric <value 0-16> | [route_map <map_name 16> |
no_route_map]}
Parameters
local - Redistribute local routes into RIP.
static - Redistribute static routes into RIP.
ospf - Redistribute OSPF routes into RIP.
all - Redistribute both OSPF AS-internal and OSPF AS-external routes into RIP.
internal - Only redistribute OSPF AS-internal routes.
external - Only redistribute OSPF AS-external routes, including type-1 and type-2 routes.
type_1 - Only redistribute OSPF AS-internal type-1 routes.
type_2 - Only redistribute OSPF AS-internal type-2 routes.
inter+e1 - Only redistribute OSPF AS-internal type-1 and OSPF AS-internal routes.
inter+e2 - Only redistribute OSPF AS-internal type-2 and OSPF AS-internal routes.
metric - (Optional) Specify the RIP route metric value for the redistributed routes.
<value 0-16> - Enter the value from 0 to 16. The default value is 0.
route_map - (Optional) Specify the route map for the redistributed routes.
<map_name 16> - Enter the name of the route map.
no_route_map – (Optional) Specify to remove the route map associated with the redistributed
routes.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the route redistributions:
DGS-3120-24TC:admin#config route redistribute dst rip src ospf internal
Command: config route redistribute dst rip src ospf internal
Success.
DGS-3120-24TC:admin#