D-Link xStack DGS-3120 Series User Manual

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
913
user - Specify the user account that will be used for this configuration.
<username 15> - Enter the user account's user name here. This name can be up to 15
characters long.
Restrictions
Only Administrator level can issue this command.
Example
This example shows how to associate a public key with the index of 1 to the user account named
“User1”:
DGS-3120-24TC:admin# config ssh client_pubkey_owner key_id 1 add user User1
Command: config ssh client_pubkey_owner key_id 1 add user User1
Success.
DGS-3120-24TC:admin#
94-15 show ssh client_pub_key
Description
This command is used to display the client SSH public key.
Format
show ssh client_pub_key
Parameters
None.
Restrictions
None.
Example
This example shows how to display SSH public keys.

D-Link xStack DGS-3120 Series Specifications

General

MAC Address Table	16K entries
Ports	10/100/1000BASE-T ports
VLANs	4094
Jumbo Frame	Up to 9KB
Power Supply	Internal power supply (depending on model)
Power over Ethernet (PoE)	No
Layer 3 Features	RIP
Quality of Service (QoS)	8 queues per port, DiffServ
Security Features	ACLs
Management	Web-based, CLI, SNMP
Operating Temperature	0°C to 40°C
Storage Temperature	-40°C to 70°C
SFP Ports	Combo 10/100/1000BASE-T/SFP ports and/or dedicated SFP/SFP+ ports (depending on model)