D-Link xStack DGS-3120 Series - Page 98

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
93
xtacacs - Specify XTACACS server host.
tacacs+ - Specify TACACS+ server host.
radius - Specify RADIUS server host.
Restrictions
Only Administrator-level users can issue this command.
Example
To tacacs | xtacacs | tacacs+| delete an AAA server host, with an IP address of 10.1.1.222, that is
running the TACACS+ protocol:
DGS-3120-24TC:admin#delete aaa server_host 10.1.1.222 protocol tacacs+
Command: delete aaa server_host 10.1.1.222 protocol tacacs+
Success.
DGS-3120-24TC:admin#
5-43 show aaa server_host
Description
This command is used to display the AAA server hosts.
Format
show aaa server_host
Parameters
None.
Restrictions
Only Administrator-level users can issue this command.
Example
To display all AAA server hosts: