D-Link xStack DGS-3120 Series - Page 987

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
982
DGS-3120-24TC:admin# disable snmp traps
Command: disable snmp traps
Success.
DGS-3120-24TC:admin#
101-28 enable snmp authenticate_traps
Description
This command is used to enable SNMP authentication failure trap support.
Format
enable snmp authenticate_traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To enable SNMP authentication trap support:
DGS-3120-24TC:admin# enable snmp authenticate_traps
Command: enable snmp authenticate_traps
Success.
DGS-3120-24TC:admin#
101-29 disable snmp authenticate_traps
Description
This command is used to disable SNMP authentication failure trap support.
Format
disable snmp authenticate_traps
Parameters
None.