D-Link xStack DGS-3120 Series - Page 994

xStack
®
DGS-3120 Series Layer 3 Managed Gigabit Ethernet Switch CLI Reference Guide
989
Restrictions
Only Administrator-level users can issue this command.
Example
To disable the encryption state on SNMP community string:
DGS-3120-24TC:admin#disable community_encryption
Command: disable community_encryption
Success.
DGS-3120-24TC:admin#
101-40 show community_encryption
Description
This command is used to display the encryption state on SNMP community string.
Format
show community_encryption
Parameters
None.
Restrictions
None.
Example
To display the encryption state on SNMP community string:
DGS-3120-24TC:admin#show community_encryption
Command: show community_encryption
SNMP Community Encryption State : Enabled
DGS-3120-24TC:admin#