genesys ensemble/genesys grand ensemble
Page 110
Check that the first line is set to Coarse and Finetune and
then move the cursor down to the bottom line of this window.
Turn the dial all the way to right to select ALL
Now press ENTER. Your tuning has now been copied to
each octave.
As you may have noticed, you can also use the COPY TO
OCT. window to copy only specific elements of your tuning
to specific octaves if you wish.
Once youve created your new tuning, youll need to save
it. Press SAVE (F8).
Use the dial to select one of the 8 user tuning memories.
These memories are normally all empty so, if this is your
first tuning, select USER 1. Press ENTER to complete the
operation.
Your new tuning is now saved as USER 1. When you need
to use it in the future, juast return to the TUNING & SCALE
menu and select it with the dial in the second line of the
top window.
To Next Page
Loading...
Need help?
General
