genesys ensemble/genesys grand ensemble
Page 104
EDITING THE PROGRAMMABLE PADS
The 4 pads on the left side of the instrument can be
programmed either to produce sound effects or to provide
quick access to other controls normally found inside sub-
menus.
To assign the functions of the pads press the pads EDIT button.
In the screen you can see the current setting for each pad.
To change this setting, simply highlight it with the arrow
keys and then use the dial to select a different setting.
PAD SETTINGS
NOTE
This allows you to set the pad to play a single note using
any available sound. In order to do this, you need to give
the pad three pieces of information; which note to play,
how loud to play it and which sound to use.
As soon as you set the pad to NOTE you can test the pad by
pressing it. If you dont hear anything, its probably because
the note being played is too low or too soft.
1234
TAP TEMP
To Next Page
Loading...
Need help?
General
