Hioki IM3570 - Page 111

4.4 Judging Measurement Results
103
4
Chapter 4 LCR Function
The set reference value and upper and lower limit values are common to percentage mode
and percentage deviation mode.
Press .
7
Use the numeric keypad to enter the upper
limit value of the first parameter.
8
12
Press to return to the BIN setting screen.
9
Return to step 7, press , and use the numeric keypad to enter the lower limit value.
10
Press to confirm the lower limit value.
11
Return to step 6, and set the upper and lower limit values of the second parameter in the same way.
13
Press to close the setting screen.
Settable range: -999.9999% to 999.9999%
Upper/Lower Limit Value Settings
Upper Limit Value Setting
Settable range: -999.9999% to 999.9999%
Press to confirm the upper limit value.
When you do not want to set the upper and
lower limit values: Press .