Hioki IM3570 - Saving Measurement Results (Memory Function)

4.5 Setting Application Settings
106
You can save the measurement results inside the instrument. (Up to 32,000 items) The saved measurement
results can be saved to a USB flash drive. They can also be acquired using a communication command. (The
memory function is the same in mode and mode.)
The items saved to memory are in accordance with the
:MEASure:VALid setting.
For details on how to acquire the saved measurement results or set
:MEASure:VALid, refer to the
included
CD.
4.5.2 Saving Measurement Results (Memory function)
Saving Measurement Values
Procedure
LCR Initial Screen
Application Settings
1
Press .
Use or to set the number of
measurement results.
3
Settable range: 1 to 32000
The number of measurement results can only be set
when the memory function is set to OFF.
Memory Function Setting
Application Settings
2