Hioki IM3570 - Setting the Measurement Speed

4.3 Setting DC Resistance Measurement
77
4
Chapter 4 LCR Function
The testing speed can be set. The slower the testing speed is, the more accurate are the results.
4.3.4 Setting the Measurement speed
Procedure
LCR Initial Screen
4
Press to close the setting screen.
1
Rdc Basic Settings
3
Measurement Speed Setting
Press .
2
Rdc Basic Settings
To select the measurement speed.
The testing speed varies according to the number of
parameters being displayed, and according to their
type.
See "About Measurement Times and Measurement
Speed" (p. 399)
Performs high-speed measurement.
This is the normal measurement speed.
Measurement precision improves.
Measurement accuracy is better than
SLOW.