Hioki IM3570 - 2.5 Turning the Power On and Off

2.5 Turning the Power On and Off
31
2
Chapter 2 Measurement Preparations
Connect the power cord and voltage and current measurement cables before turning the instrument on.
2.5 Turning the Power On and Off
Main power switch
Turning main power on
Turn the MAIN POWER switch on ( | ).
When the power is turned on, the same setting as when the power
was last turned off appears.
Lights green
For high-precision measurements, allow
at least 60 minutes warm-up before exe-
cuting zero adjustment.
Turning main power off
Turn the MAIN POWER switch off ( ).
At that time, the measurement conditions are saved.
OFF
When the power supply is interrupted by a power failure or the like, the instrument recovers
in the measurement mode used before the power failure.