Hioki IM3570 - 9.2 Loading Measurement Conditions (Panel Load Function)

8.4 Setting the Date and Time
314
You can set the date and time of the instrument.
Data is recorded and managed based on the set date and time.
8.4 Setting the Date and Time
Settable range:
00:00:00, January 1, 2000, to
23:59:59, December 31, 2099
LCR Initial Screen
1
2
Date & Time Settings
Date & Time Settings
Press to confirm the setting.
Use or to set the date and time.
3
Press to close the setting screen.
Procedure
This operation is possible in any of the mode, mode.
(Year-Month-Day Hour-Minute-Second)