Hioki IM3570 - Checking the Contents of Files

10.4 Saving Measurement Data
343
8
10
Chapter 10 Using USB Flash Drive
You can check files saved to a USB flash drive in text format ([TXT], [CSV]) and BMP format on the
screen.
3
Checking the Contents of Files
Procedure
Use or to select the file to check.
3
Press to check the file.
Insert the USB flash drive into the USB port (front panel).
LCR Initial Screen File List Screen
File Selection
2
1
CSV File Display BMP File Display
4
Press to close the setting screen.
The indicated key varies depending on the type
of the selected file.
• When [FDR]:
•
When [TXT], [CSV], or [BMP]: