8.1 Setting the Interface
305
8
Chapter 8 Setting the SYSTEM
You can control the instrument from a computer via the GP-IB, RS-232C, USB, and LAN interfaces. Printing
can also be performed with an RS-232C printer.
Setting the
SYSTEM Chapter 8
8.1 Setting the Interface
3
Select and check each of the settings,
and press to close the setting screen.
2
Select the interface type.
1
LCR Initial Screen
Interface Settings
When setting other than a printer:
See Communication Instruction Manual “Chapter 2”
(CD)
RS-232C Settings GPIB Setting
USB Setting LAN Settings
Printer Setting (p. 384)
This operation is possible in any of the mode, mode.
Procedure
To Next Page
Loading...
