Hioki IM3570 - Search Target Parameter Setting; Option Setting

5.6 Checking the Measurement Values
191
5
Chapter 5 ANALYZER Function
4
Search Target Parameter Setting
5
Option setting
Search Function Setting
Set the search target parameter.
See "Performing Measurement Value Search" (p. 194)
Sets the measurement result of parameter 1 as
the search target.
Sets the measurement result of parameter 2 as
the search target.
Search Function Setting
Press .
? This can be set when or is selected for the cursor display setting (p. 189), and
for the search function setting (p. 190).
See: "Performing Measurement Value Search" (p. 194)
? Set the value for which to search when executing a target search.
Settable range: -9.999999G to 9.999999G
1
Search Function Setting
2
Set the measurement value for which to
search.
Set the measurement value for which to search.
Press to confirm the setting.