8.3 Self Checks (Self Diagnosis)
307
8
Chapter 8 Setting the SYSTEM
You can check the display screens of the instrument.
You can check the touch panel.
8.3 Self Checks (Self Diagnosis)
Panel Test
LCR Initial Screen
1
Self Checks
3
Press .
2
Self Checks
Panel Test
Press the keys displayed on the screen.
If the pressed keys are highlighted and the green
appears, the touch panel is working properly.
Perform panel compensation (p. 308) if they are not
highlighted or the red appears.
If there is still problem after performing panel calibration,
the panel may be malfunctioning. Contact your dealer or
Hioki representative.
Procedure
This operation is possible in any of the mode, mode.
To Next Page
Loading...
