Appendix
Appendix 13 Device Compliance Statement
A23
"Information on compliance to standards" based on the IEEE 488.2 standard
Appendix 13 Device Compliance Statement
Item Description
1. IEEE 488.1 interface functions
See Communication Instruction Manual (CD)
2. Operation with a device address other than 0
through 30
Such a setting is not possible.
3. Timing of changed device address recognition
A change of address is recognized immediately after changing.
4. Device settings at power on
The status information is cleared, and all other items are pre-
served. However, the header on/off setting, and response mes-
sage separator and terminator are all reinitialized.
5. List of message exchange options
• Input buffer capacity and operation
See
Included CD
Queries to which multiple response message units are returned
:BIN:FLIMit:ABSolute? .................. 2
:BIN:FLIMit:DEViation? ................. 2
:BIN:FLIMit:PERcent? ................... 2
:BIN:SLIMit:ABSolute? .................. 2
:BIN:SLIMit:DEViation?.................. 2
:BIN:SLIMit:PERcent?.................... 2
:COMParator:FLIMit:ABSolute?............ 2
:COMParator:FLIMit:DEViation?........... 3
:COMParator:FLIMit:PERcent?............. 3
:COMParator:SLIMit:ABSolute?............ 2
:COMParator:SLIMit:DEViation?........... 3
:COMParator:SLIMit:PERcent?............. 3
:CORRection:LOAD:CONDition?............. 7
:CORRection:LOAD:DCResistance:CONDition? ..... 4
:CORRection:LOAD:REFerence?............. 3
:CORRection:SCALe:DATA?................. 2
:FILE:INFOrmation?...................... 5
:MEASure?............................... *
:MEASure:ITEM?.......................... 2
:MONItor?............................... 4
:SYSTem:DATE?........................... 3
:SYSTem:TIME?........................... 3
:COMParator:AREA:FIX?................... 4
:COMParator:AREA:LIMit?................. 2
:COMParator:AREA:MEAS?.................. 3
:COMParator:PEAK?....................... 4
:COMParator:PEAK:NO?.................... 2
To Next Page
Loading...
