Hioki IM3570 User Manual

11.1 External Input/Output Connector and Signals
364
The connector shell is conductively connected to the metal instrument chassis and the protective earth pin of
the power plug. Be aware that it is not isolated from ground.
Connector Type and Signal Pinouts
EXT I/O Connector (Instrument Side)
Connector: (Instrument Side)
• 37-pin D-sub female with #4-40 screws
Mating Connectors:
• DC-37P-ULR (solder type)
• DCSP-JB37PR (pressure weld type)
Japan Aviation Electronics Industry Ltd.
12345678910111213141516171819
202122232425262728293031323334
353637
TRIG
(Unused) (Unused)
LD1
LD3
(Unused)
ISO_5V
ISO_COM
BIN7
, AND
BIN9
LD5
ERR
BIN1, PARA1-HI
BIN3, PARA1-LO
BIN5, PARA3-IN
(Unused) (Unused)
OUT_OF_BINS
(Unused)
(Unused) CALIB
LD0 LD2 LD4 LD_VALID ISO_COM EOM BIN8 BIN10 LD6 INDEX BIN2, PARA1-IN BIN4, PARA3-HI BIN6, PARA3-LO (Unused) (Unused) (Unused)
LCR Mode Analyzer Mode
12345678910111213141516171819
202122232425262728293031323334
353637
TRIG
(Unused) (Unused)
LD1
LD3
(Unused)
ISO_5V
ISO_COM
AND
PARA1_LMIN_IN
LD5
ERR
PARA1-HI, PARA1_LMAX_MEASNG
PARA1-LO, PARA1_LMAX_CONDNG
PARA2-IN, PARA2_LMAX_IN
PARA2_LMIN_MEASNG
PARA2_LMIN_CONDNG
CIRCUIT_NG
(Unused)
(Unused) (Unused) LD0
LD2 LD4 LD_VALID ISO_COM EOM PARA1_LMIN_MEASNG PARA1_LMIN_CONDNG LD6 INDEX PARA1-IN, PARA1_LMAX_IN PARA2-HI, PARA2_LMAX_MEASNG PARA2-LO, PARA2_LMAX_CONDNG PARA2_LMIN_IN (Unused) (Unused)

Hioki IM3570 Specifications

General

Brand	Hioki
Model	IM3570
Category	Measuring Instruments
Language	English