Hioki IM3570 - Displaying Average Values (Average Set)

4.3 Setting DC Resistance Measurement
80
With the averaging function, the measured values can be averaged. Using this function, it is possible to
reduce fluctuations in the measured value display.
After the signal level and range are set, measurement is performed for the set number of averaging times and
the measurement values are displayed.
4.3.6 Displaying Average Values (Average set)
The averaging process during Rdc measurement performs arithmetic averaging processing
regardless of the trigger setting.
Procedure
LCR Initial Screen
1
Rdc Basic Settings
Press .
2
Rdc Basic Settings