Hioki IM3570 - 10.8 File and Folder Operations

10.6 Saving Instrument Settings
349
8
10
Chapter 10 Using USB Flash Drive
Save various setting information of the instrument as a setting file to the USB flash drive.
The extension of the setting file is “.SET.” This function is convenient for when you want to back up the setting
state of the instrument.
For the settings that are saved, refer to "Initial Setting List."
10.6 Saving Instrument Settings
1
Saving Instrument Settings
Procedure
2
Press .
3
LCR Initial Screen File List Screen
File List Screen
Insert the USB flash drive into the USB port (front panel).
1