Hioki IM3570 - Application Settings; Saving Measurement Results (Memory Function)

5.9 Application Settings
219
5
Chapter 5 ANALYZER Function
You can save the measurement results inside the instrument. (Up to 32,000 items) The saved measurement
results can be saved to a USB flash drive.
They can also be acquired using a communication command. (The memory function is the same in
mode and mode.)
The items saved to memory are in accordance with the
:MEASure:VALid setting.
For details on how to acquire the saved measurement results or set
:MEASure:VALid, refer to the
included CD.
5.9 Application Settings
LCR
ANALYZER
5.9.1 Saving Measurement Results (Memory function)
Saving Measurement Values
Procedure
Application Settings
1
Analyzer Initial Screen
Press .
2
Application Settings