Hioki IM3570 - 14 Initializing (System Reset)

4.5 Setting Application Settings
129
4
Chapter 4 LCR Function
In the event of the instrument malfunctioning, check "Before returning for repair" (p. 405).
If you do not know the cause of the problem, perform a system reset to restore the instrument to its factory
default settings.
A system reset can also be performed with the
*RST and:PRESet communication commands.
See Description of communications commands on the included CD
4.5.14 Initializing (System Reset)
Procedure
LCR Initial Screen
1
Application Settings
3
Press .
2
Application Settings
System Reset
Press to restore the factory
default settings and automatically redisplay
the initial screen.
When you want to cancel the system reset:
Press .
If the initialization screen cannot be displayed, perform a full reset. (p. 406)