Hioki IM3570 - Page 190

5.5 Setting the Graph Display Method
182
3
Graph Color Setting When Segment Sweep
When the setting is :When the setting is :
Select the segment for which to set the color.
To reflect the color of segment 1 to all
segments:
Press .
To restore the colors of all segments to
the initial state:
Press .
4
Press to close the setting screen.
Graph Color Setting
Also set parameter 2 in the same way.
When you do not want to set colors:
If you select , a graph will not be drawn.
The setting differs depending on "5.2.6 Segment Setting" (p. 142).