5.9 Application Settings
221
5
Chapter 5 ANALYZER Function
Saving Data in Instrument Memory to USB Flash Drive
• If the memory function is set to ON, the number of memory items currently saved is dis-
played in the measurement screen.
• Save the data stored in the instrument to a USB flash drive or acquire it with the
:Memory? command.
• The data in the instrument memory is lost when the memory function setting is changed.
• When the instrument memory becomes full, the following message appears on the mea-
surement screen.
If this message appears, subsequent measurement results will not be saved.
To resume saving, load or clear the measurement results from the instrument memory.
Press to save the data in the instru-
ment memory to a USB flash drive.
Memory Function Setting
When this function is used to save the data in the in-
strument memory to a USB flash drive, the data is
cleared from the instrument memory automatically.
Connect a USB flash drive. (p. 329)
Indicates that the number of memory
items currently saved is 1,144.
To Next Page
Loading...
