Measurement signal level setting (p. 157)
Measurement range setting (p. 160)
Measurement speed setting (p. 164)
Average setting (p. 165)
Point delay setting (p. 166)
Initial screen is displayed.
Basic setting
DC bias setting (p. 167)
Measurement parameter setting (p. 133)
Trigger delay setting (p. 140)
Segment setting (p. 142)
Sweep point setting (p. 143)
Trigger setting (p. 137)
Display timing setting (p. 139)
Sweep parameter setting (p. 135)
To Next Page
Loading...
