Hioki IM3570 - 9.4 Deleting a Panel

9.1 Saving Measurement Conditions (Panel Save Function)
318
3
Select the save type.
Saves both the measurement condition and com-
pensation value.
Saves only the measurement condition.
Saves only each of the setting values and com-
pensation values of open compensation, short
compensation, load compensation, cable length
compensation, and scaling compensation.
4
Press .
Panel Main Screen
5
Press to close the setting screen.
Analyzer Initial Screen
You can save a panel in the same way in analyzer measurement mode.
When analyzer measurement mode
Common Settings