Hioki IM3570 - Page 345

10.4 Saving Measurement Data
337
8
10
Chapter 10 Using USB Flash Drive
Measurement Parameter Setting
Measurement Parameter Setting
1. Select ON/ OFF for measurement parameter recording.
Does not record the measurement parameter.
Records the measurement parameter.
2. Press to close the setting screen.
"DATE","10-05-23"
"TIME","12:35:08"
"FREQ","1.0000E+03","Hz"
"V","1.000","V"
"LIMIT","OFF"
"RANGE","30k","
","AUTO"
"LOW Z","OFF"
"JUDGE","OFF"
"SPEED","MED"
"TRIG","INT"
"AVE","OFF"
"DELAY","0.0000","s"
"DCBIAS","OFF"
"OPEN","OFF"
"SHORT","OFF"
"LOAD","OFF"
"CABLE","0","m"
"SCALE","OFF"
"Z[
]","OFF","[°]","OFF"
"16.1504E+03","","-89.992",""
"HIOKI E.E. CORPORATION","IM3570","Ver. 1.00"
"DATE","10-05-23"
"TIME","12:35:35"
"FREQ","1.0000E+03","Hz"
"V","1.000","V"
"LIMIT","OFF"
"RANGE","30k","
","AUTO"
"LOW Z","OFF"
"JUDGE","OFF"
"SPEED","MED"
"TRIG","INT"
"AVE","OFF"
"DELAY","0.0000","s"
"DCBIAS","OFF"
"OPEN","OFF"
"SHORT","OFF"
"LOAD","OFF"
"CABLE","0","m"
"SCALE","OFF"
"16.1504E+03","","-89.992",""
When ON When OFF