3
Connect the test sample to the 9263 SMD test fixture.
For the connection procedure of the test sam-
ple, refer to the instruction manual supplied
with the fixture.
4
Check the measurement results.
• When you want to measure under desired condition
and timing
See: "4.2.4 Perform Measurements with User-defined
Timing (Trigger Measurement)" (p. 55)
• When you want to judge the measurement results
See: "4.4.1 Judging with Upper and Lower Limit Values
(Comparator Measurement Mode)" (p. 86)
• When you want to save the measurement results
See: "4.5.2 Saving Measurement Results (Memory
function)" (p. 106)
To Next Page
Loading...
