Keysight Technologies InfiniiVision MSO-X 4154A

Commands Quick Reference 4
Keysight InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide 125
:MEASure:CPLoss
[<source1>][,<source2
>] (see page 561)
:MEASure:CPLoss?
[<source1>][,<source2
>] (see page 561)
<source1>, <source2>
<source1> ::= {FUNCtion<m> |
MATH<m>}
<source2> ::= {CHANnel<n>}
<m> ::= 1 to (# math functions)
in NR1 format
<n> ::= 1 to (# analog channels)
in NR1 format
<return_value> ::= the switching
loss per cycle watts value in NR3
format
:MEASure:CRESt
[<source>] (see
page 562)
:MEASure:CRESt?
[<source>] (see
page 562)
<source> ::= {CHANnel<n>|
FUNCtion<m> | MATH<m>}
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1 to (# math functions)
in NR1 format
<return_value> ::= the crest
factor value in NR3 format
:MEASure:EFFiciency
(see page 563)
:MEASure:EFFiciency?
(see page 563)
<return_value> ::= percent value
in NR3 format
:MEASure:ELOSs
[<source>] (see
page 564)
:MEASure:ELOSs?
[<source>] (see
page 564)
<source> ::= {CHANnel<n>|
FUNCtion<m> | MATH<m> |
WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1 to (# math functions)
in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<return_value> ::= the energy
loss value in NR3 format
:MEASure:FACTor
[<source1>][,<source2
>] (see page 565)
:MEASure:FACTor?
[<source1>][,<source2
>] (see page 565)
<source1>, <source2> ::=
{CHANnel<n>}
<n> ::= 1 to (# analog channels)
in NR1 format
<return_value> ::= the power
factor value in NR3 format
:MEASure:IPOWer (see
page 566)
:MEASure:IPOWer? (see
page 566)
<return_value> ::= the input
power value in NR3 format
Table 20 :MEASure Power Commands Summary (continued)
Command Query Options and Query Returns