Krone Comprima CF 155 XC - 8.7 Menu 1-2 Adjustment baler

KRONE ISOBUS Terminal
127
Pos: 48.71 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI-Pr ess-Wickelvorric htung/Hauptmenüs/ Hauptmenü 1 Einstellungen/ Menü 1-2 Einstellung Pr esse_Comprima CF/CV XC @ 233\mod_1393919011230 _78.docx @ 1856935 @ 22 @ 1
8.7 Menu 1-2 Adjustment baler
CC000255
1-2
Fig. 89
Displaying the menu
Main menu 1 “Settings” is displayed.
• Select menu 1-2
by pressing function key or , the symbol is highlighted in
grey.
• Press function key
.
The display shows menu 1-2 "Baler setting".
The symbol
in the upper line indicates that the displayed status is saved.
Menu 1-2 "Baler setting" is divided into seven menus, depending on how the machine is
equipped:
Menu 1-2-2 “Bale diameter” (Comprima CF 155 XC)
n
Menu 1-2-3”Number net winds”
Menu 1-2-4 “Sensitivity of direction display” (Comprima CF 155 XC)
Menu 1-2-5 “ Pre-signalling”
+
-
Menu 1-2-9 “Filling correction”
Menu 1-2-9 “Tying start deceleration”
Pos: 48.72 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1