Krone Comprima CF 155 XC - 8.12.1 Move the Height of the Wrapping Arms

KRONE ISOBUS Terminal
156
Pos: 48.130 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI- Press-Wickelvorric htung/Hauptmenüs/ Hauptmenü 3 Handbedienung/ Wickler verfahren C V210 @ 61\mod_129907899904 6_78.docx @ 570233 @ 33 @ 1
8.12.1 Move the Height of the Wrapping Arms
R
4
2
1
3
0
0
0
2/2
Fig. 118
• Use softkey
to move the wrapping arms to the top as long as the softkey is
activated or the desired position is reached
• Use the
softkey to move the wrapping arms downwards as long as the softkey is
activated or the desired position has been reached
• Press
0
softkey and hold it down until the wrapping arm has reached the zero position
• Pressing the function key
closes the called up menu
Pos: 48.131 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI- Press-Wickelvorric htung/Hauptmenüs/ Hauptmenü 3 Handbedienung/ Statusmeldungen Höhe Wickler @ 61\mod_129907 3223071_78.doc x @ 569797 @ @ 1
Possible Status Messages Window 2 (Height Wrapping Arm):
= wrapping arm in parking position
= wrapping arm in wrapping position to 150 cm bale size
= wrapping arm in wrapping position to 175 cm bale size
= wrapping arm in pushing position in case of a bale size larger than 175 mm
(only if the wrapping arm is deactivated)
Pos: 48.132 /Layout Mod ule /---------- -----Seitenumbruc h------------- --- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1