Maintenance
300
Pos: 59.99 /BA/W artung/Rundballenpres se/Kontrolle der Sic herungsrollen der Einzel messersicherung CF/ CV @ 75\mod_1309433183952 _78.docx @ 663320 @ 22 @ 1
13.13 Checking the Safety Rollers of Single Blade Locking Device
A
B
RPN00079
1
Fig. 234
The safety rollers (1) on the levers of the single blade locking device must turn slightly when
they are turned on (tension of safety springs with multipurpose key after blades are installed). If
they do not, the result will be an increased amount of force when switching. The individual knife
retention will not work properly (increased blade breakage). To prevent this, lubricate the safety
rollers (1) if they no longer turn easily. However, at least once a year.
Pos: 59.100 /BA/W artung/Ladewagen/Hin weis EP Langzeitfett NLGI2 verwenden @ 13\mod_1225287 158244_78.doc x @ 154964 @ @ 1
Note
To lubricate the safety rollers, use an EP long-term grease NLGI 2 order No. 926 045 0
(400 grams).
Pos: 59.101 /Layout Mod ule /---------- -----Seitenumbruc h------------- --- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1
To Next Page
Loading...
Need help?
General
