Start-up
88
Pos: 44.55 /Übersc hriften/Überschri ften 2/F-J/Inbetr iebnahme Ballenwender @ 66\ mod_1302176290543_78. docx @ 615155 @ 22 @ 1
6.12 Start-up Bale Turner
Pos: 44.56 /BA/Einlei tung/Ballenwender /Verwendungszwec k @ 67\mod_1302863081415_ 78.docx @ 621519 @ @ 1
The bale turner is used to set bales down from the wrapping table directly on the ground on
their front side.
Bales must be stood up while the machine is stopped.
Functional safety can only be guaranteed to a limited extent on slopes. Check the sheet after
the bales have been stood up. In extreme situations (for example conical bales, on slopes)
standing up the bale could possibly result in damage to the sheet. In this case bales should not
be stood up and the bale turner must be folded back (1) or removed.
Fig. 54
Note
Depending on the setting of the bale turner, it can remain folded back on the wrapping table,
even if bales are not being stood up.
Pos: 44.57 /BA/Einlei tung/Ballenwender /Hinweis keine Schaden ersatzansprüche wegen Ver derb der Silage @ 14\mod _1228144623978_78.doc x @ 170495 @ @ 1
Note
We are unable to honour claims for damage due to spoiling of silage because numerous factors
involved are beyond our control.
Pos: 44.58 /BA/Inbetr iebnahme/Rundballe npresse/Ballen wender/Hinweis Hanglage Fu nktionssicherhei t @ 14\mod_12278741876 48_78.docx @ 170438 @ @ 1
Note
Under difficult conditions (for example on slopes), the functional safety of the bale turner can be
increased by using the largest possible tyres (500/55-20 12 PR).
Pos: 44.59 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1