Krone Comprima CF 155 XC - 16.2 Malfunctions on the central chain lubrication system

Malfunctions - Causes and Remedies
345
Pos: 63.8 /Überschri ften/Überschri ften 2/P-T/Störungen an der zentralen Kettensc hmierung @ 35\mod_1256199 185431_78.docx @ 3270 48 @ 22 @ 1
16.2 Malfunctions on the central chain lubrication system
Pos: 63.9 /BA/Störungen - Ursachen und Behebung/ Rundballenpressen/ Tabellarische Auf listung Kettenschmier ung @ 240\mod_1395153 485543_78.docx @ 1891808 @ @ 1
Malfunction Possible cause Remedy
Low oil consumption Low pressure
Pump works with difficulty, dirt in the
pump area
• Clean
Pump is not pressed to a full stroke
• Adjust according to the operating
instructions
Pump valve does not close correctly
• Remove and clean or replace
Oil is too thick • Replace with recommended oil
System contaminated
• Clean or replace all measuring
valves
Oil consumption too high Main pipe torn • Repair or replace
Oil too thin • Drive with thicker oil
• Reduce the pump stroke
Machine is dry No pressure
Pump not running
• Repair, adjust or replace
Main pipe torn
• Repair or replace
System has no oil
• Vent the system (see chapter
Central chain lubrication system)
System blocked Dirt
• Clean the system and clean or
replace all measuring valves.
Pipe jammed
• Repair or replace
Pump is not pressed to a full
stroke.
Oil is too thick, nozzles clogged.
• Replace with recommended oil
• Clean nozzles
Pos: 63.10 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1