Maintenance
321
Pos: 59.179 /Übersc hriften/Überschr iften 3/F-J/Hydrauli kölfilter wechseln @ 34\ mod_1255587384500_7 8.docx @ 324072 @ 33 @ 1
13.18.5 Replacing the Hydraulic Oil Filter
Pos: 59.180 /BA/W artung/Umwelt/Hinweis En tsorgen / Lagern von Öle und Ölfilter Umwelt @ 32\mod_1 253101375171_78.doc x @ 311770 @ @ 1
ENVIRONMENT! - Disposal and storage of used lubricants and oil filters
Effect: Environmental damage
Store or dispose used oil and oil filters according to statutory provisions.
Pos: 59.181 /BA/W artung/Rundballenpres se/Bild Wechsel Hydr aulikölfilter CF/C V @ 76\mod_1309960218582_7 8.docx @ 665893 @ @ 1
COM00006_2
4
1
7
COM00021
1
2
5
3
4
EIN
AUS
Fig. 254
Pos: 59.182 /BA/W artung/Rundballenpres se/Hydraulikölfi lter wechseln @ 54\mod_12 91811841968_78.doc x @ 516207 @ @ 1
The filter takes up depositions of solid particles of the hydraulic system. The filtering of the
hydraulic circuit serves as a prevention of damages on components of the circuit. The filter is
equipped with an optical contamination indicator (7). The contamination indicator (7) informs
optically about the degree of contamination of the filter.
Note
Check the contamination indicator before the machine is used. If the display field is green, the
filter element is OK; if the display field is red, the filter has to be changed.
When starting in cold condition the button on the contamination indicator (7) can hop out. Only
insert the button after achieving the operating temperature. In case it immediately hops out
again, the filter element needs to be changed.
To Next Page
Loading...
Need help?
General
