Safety
24
Pos: 27.72 /BA/Sic herheit/1. Grundlegend e Sicherheitshinweis e/Gefahren bei best. Tätigkeiten: Gefahr dur ch Schweißarbeiten - Außer Selbstfahrer @ 244\ mod_1395756512013_78. docx @ 1907210 @ @ 1
Danger associated with welding work
Improper welding work will endanger the operational safety of the machine. As a result,
accidents may occur and people may be seriously injured or killed.
• Before performing welding work on the machine, obtain the consent of KRONE customer
service and, if required, identify alternatives.
• Have welding work performed by experienced technicians only.
Pos: 27.73 /Übersc hriften/Überschri ften 3/F-J/Gefahren bei bestimmten Tätigkei ten: Arbeiten an Rädern und Reif en @ 187\mod_1380023 183993_78.docx @ 1607653 @ 33 @ 1
4.3.20 Dangers associated with certain activities: Working on wheels and tyres
Pos: 27.74 /BA/Sic herheit/1. Grundlegend e Sicherheitshinweis e/Gefahren bei best. Tätigkeiten: Arbei ten an Rädern und Reifen @ 177\mod_137 3290205171_78.doc x @ 1510669 @ @ 1
Fitting/removing wheels and tyres
Improper fitting or removal will endanger operational safety. As a result, accidents may occur
and people may be seriously injured or killed.
The fitting of wheels and tyres requires adequate knowledge and approved tools.
• If there is a lack of knowledge, have the wheels and tyres fitted by the KRONE dealer or by
a qualified tyre service.
• When fitting tyres on the wheel rims, never exceed the maximum permitted pressure
specified by the tyre manufacturers, otherwise the tyre or even the wheel rim may explode.
• When fitting the wheels, tighten the wheel nuts to the stipulated torque, see chapter
Maintenance "Tyres".
Pos: 27.75 /Übersc hriften/Überschri ften 3/U-Z/Verhalten i n Gefahrensituationen u nd bei Unfällen @ 187\mod_13 80023393504_78.doc x @ 1607682 @ 33 @ 1
4.3.21 Behaviour in hazardous situations and when accidents occur
Pos: 27.76 /BA/Sic herheit/1. Grundlegend e Sicherheitshinweis e/Verhalten in Gefahr ensituationen und bei Unfällen @ 177\mod_1373 291508723_78.docx @ 1510 758 @ @ 1
Neglected or incorrect procedures in hazardous situations may obstruct or prevent the rescue of
people in danger. Difficult rescue conditions will impair the chances of helping and healing the
injured.
• In principle: Switch off the machine.
• Gain an overview of the hazardous situation and identify the cause of the hazard.
• Safeguard the accident location.
• Rescue people from the danger zone.
• Withdraw from the danger zone and do not enter again.
• Alert rescue teams and, if possible, fetch help.
• Take immediate life-saving measures.
Pos: 28 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @ @ 1
To Next Page
Loading...
Need help?
General
