Krone Comprima CF 155 XC - 8.8.1 Menu 1-3-1 Number of layers

KRONE ISOBUS Terminal
135
Pos: 48.88 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI-Pr ess-Wickelvorric htung/Hauptmenüs/ Hauptmenü 1 Einstellungen/ Menü 1-3-1 Anzahl Lagen @ 53\ mod_1289903150046_7 8.docx @ 506726 @ 33 @ 1
8.8.1 Menu 1-3-1 Number of layers
CC000271
1-3-1
n
+
n
-
AUT O
n
6
Fig. 97
Displaying the menu
Menu 1-3 "Wrapper setting" is called.
• Select the menu 1-3-1
n
by pressing the function key or . The symbol is
highlighted in grey.
• Press function key
.
The display shows menu 1-3-1 "Number of layers".
Adjusting the number of layers
The time delay is shown in seconds.
Note
How many layers will be applied.
• Set the desired number of layers via function key
or .The symbol in the upper line
goes out.
• Press function key
.
The symbol
in the upper line indicates that the displayed value is saved.
• Use softkey DEF to reset the operating mode to the factory setting.
• Pressing the function key
closes the called up menu.
• Pressing the function key longer
and holding it down brings up the basic screen.
Pos: 48.89 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1