Maintenance
276
Pos: 59.10 /Übersc hriften/Überschri ften 2/U-Z/Wartungstabe lle @ 65\mod_13003694 13064_78.docx @ 583966 @ 2 @ 1
13.2 Maintenance table
Pos: 59.11 /BA/W artung/Rundballenpres se/Tabelle Wartungsarbei ten CF/CV @ 75\mod_13093 54037097_78.doc x @ 662609 @ @ 1
Maintenance interval Machine part
Oil change
Check
Set
Vent
Tighten
after the first 8 operating hours and
every time after a wheel is changed
Wheels, wheel nuts
X
after longer downtimes
PTO shaft friction clutch
X
after the first 500 bales, then every
3000 bales, but at least 1x per year
Screws from the floor conveyor
X
see Chapter
Maintenanc
e
when the season begins (after
approx. 5 bales)
Chain tension floor conveyor drive
X X
Chain tension floor conveyor
X X
Chain tension pick-up drive
X X
Chain tension roller drive
Chain tension pick-up drive
X X
X X
After first use
(approx. 30 - 50 operating hours),
then annually after each season
Gearbox
X
after first use und then after every
1000 bales
Floor conveyor tension
X X
Pos: 59.12 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1
To Next Page
Loading...
Need help?
General
