Safety
16
Pos: 27.20 /Übersc hriften/Überschri ften 3/A-E/B/Betri ebssicherheit: Techni sch einwandfreier Zustand @ 187\mod_138001221 6128_78.docx @ 1606877 @ 33 @ 1
4.3.8 Operational safety: Technically perfect condition
Pos: 27.21 /BA/Sic herheit/1. Grundlegend e Sicherheitshinweis e/Betriebssic herheit - Betrieb nur nac h ordnungsgemäßer Inbetri ebnahme @ 176\mod_137285 4464728_78.doc x @ 1506530 @ @ 1
Operation only when the machine has been started up correctly
If the machine is not started up correctly according to these operating instructions, the
operational safety of the machine is not ensured. As a result, accidents may occur and people
may be seriously injured or killed.
• Do not use the machine unless it has been started up correctly, see chapter Start-up.
Pos: 27.22 /BA/Sic herheit/1. Grundlegend e Sicherheitshinweis e/Betriebssic herheit - Technisch einwandf reier Zustand der Masc hine @ 176\mod_1372854718 958_78.docx @ 1506559 @ @ 1
Technically perfect condition of the machine
Improper maintenance and adjustment may affect the operational safety of the machine and
cause accidents. As a result, people may be seriously injured or killed.
• Perform all maintenance and adjustment work according to the chapters Maintenance and
Adjustment.
• Before performing any maintenance or adjustment work, shut down and safeguard the
machine, see chapter Safety "Shutting down and safeguarding the machine".
Pos: 27.23 /BA/Sic herheit/1. Grundlegend e Sicherheitshinweis e/Betriebssic herheit - Gefahr durch Sc häden an der Maschine @ 176\mod_ 1372856430313_78.doc x @ 1506618 @ @ 1
Danger resulting from damage to the machine
Damage to the machine may impair the operational safety of the machine and cause accidents.
As a result, people may be seriously injured or killed. The following parts of the machine are
particularly important for safety:
– Brakes
– Steering
– Safety devices
– Connecting devices
– Lighting
– Hydraulic system
– Tyres
– Universal shaft
If there are doubts about the operational safety of the machine, for example due to leaking
consumables, visible damage or an unexpected change to the driving behaviour:
• Shut down and safeguard the machine, see chapter Safety, "Shutting down and
safeguarding the machine".
• Immediately eliminate potential causes of damage, for example heavy soiling, or tighten
slack screws.
• Determine the cause of damage according to these operating instructions, see chapter
Malfunctions – Cause and remedy.
• If possible, repair the damage according to these operating instructions.
• In the case of damage which may affect operational safety and cannot be repaired
according to these operating instructions: Have damage repaired by a qualified service
centre.
Pos: 27.24 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1
To Next Page
Loading...
Need help?
General
