KRONE ISOBUS Terminal
189
Pos: 48.223 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI- Press-Wickelvorric htung/Hauptmenüs/ Meldungen/Abfragemel dung Wickeln wiederh olen @ 218\mod_139091716 3355_78.docx @ 1768967 @ 33 @ 1
8.18.3 Prompt message Repeat wrapping
Fig. 146
Prompt message "M3" appears if the function button
GO
is pressed again after wrapping
to start a second wrapping process.
• Pressing the function button clears the prompt message. The wrapping process is not
stored.
• Press the function button
GO
to start the second wrapping process. The bale is
wrapped again.
Caution!
The film must be cut off before the second wrapping!
Pos: 48.224 /Layout Mod ule /---------- -----Seitenumbruc h------------- --- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1
To Next Page
Loading...
Need help?
General
