Krone Comprima CF 155 XC - 8.8.4 Menu 1-3-4 Type of operation swivel table

KRONE ISOBUS Terminal
138
Pos: 48.94 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI-Pr ess-Wickelvorric htung/Hauptmenüs/ Hauptmenü 1 Einstellungen/ Menü 1-3-4 Bedienar t Schwenktisch @ 53\mod_ 1289904984046_78.doc x @ 506804 @ 33 @ 1
8.8.4 Menu 1-3-4 Type of operation swivel table
CC000275
1-3-4
AUT O
AUT O
mm
+
n
-
1-3-4
CC000763
AUTO
Fig. 100
Displaying the menu
Menu 1-3 "Wrapper setting" is called.
• You can select menu 1-3-4
AUTO
by pressing function key or . The symbol is
highlighted in grey.
• Press function key
.
The display shows menu 1-3-4 "Type of operation swivel table”.
The current status is displayed as an icon:
Manual mode
Selection automatic mode with wraps or
double depot without wrappings
Change and save status
• Set the desired number of layers via function key
or .The symbol in the upper
line goes out.
• Press function key
.
The symbol
in the upper line indicates that the displayed value is saved.
• Use softkey DEF to reset the operating mode to the factory setting.
• Pressing the function key
closes the called up menu.
• Pressing the function key longer
and holding it down brings up the basic screen.
Pos: 48.95 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1