Krone Comprima CF 155 XC - 8.7.1 Menu 1-2-2 Bale diameter (Only for Comprima CF155 XC)

KRONE ISOBUS Terminal
128
Pos: 48.73 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI-Pr ess-Wickelvorric htung/Hauptmenüs/ Hauptmenü 1 Einstellungen/ Menü 1-2-2 Ballendur chmesser @ 53\mod_12898 98477281_78.doc x @ 506452 @ 33 @ 1
8.7.1 Menu 1-2-2 Bale diameter (Only for Comprima CF155XC)
OK
ESC
CC000237
150
125
135 cm
1-2
CC000256
1-2-2
n
Fig. 90
Displaying the menu
Menu 1-2 "Baler setting" is called.
• Select menu 1-2-2
by pressing function key or , the symbol is highlighted in
grey.
• Press function key
.
The display shows menu 1-2-2 “Bale diameter".
The symbol
in the upper line indicates that the displayed status is saved.
Setting the bale diameter
• You can use function key
or to adjust the bale diameter mechanically set on the
machine. The symbol
in the top line disappears.
• Press the function key
. The bale diameter set is saved and the symbol appears in
the upper line.
• Pressing the function key
closes the called up menu.
• Pressing the function key
and holding it down brings up the basic screen.
Pos: 48.74 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1