Krone Comprima CF 155 XC - 8.7.4 Menu 1-2-5 Pre-signalling

KRONE ISOBUS Terminal
131
Pos: 48.80 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI-Pr ess-Wickelvorric htung/Hauptmenüs/ Hauptmenü 1 Einstellungen/ Menü 1-2-5 Vorsigna lisierung @ 53\mod_12899 01496843_78.doc x @ 506619 @ 33 @ 1
8.7.4 Menu 1-2-5 Pre-signalling
CC000263
1-2-5
n
+
-
Fig. 93
Displaying the menu
Menu 1-2 "Baler setting" is called.
• You can select menu 1-2-5
by pressing function key or . The symbol is
highlighted in grey.
• Press function key
.
The display shows menu 1-2-5 "Pre-signalling".
The symbol
in the upper line indicates that the displayed value is saved.
Note
Pre-signalling indicates how far in advance it is signalised that the bale has reached the “final
diameter”.
• Set the desired time delay with the function key or , the symbol in the top line
goes out.
• Press the function key
, the adjusted time delay is saved, the symbol in the upper
line appears.
• Pressing the function key
closes the called up menu.
• Pressing the function key longer
and holding it down brings up the basic screen.
Pos: 48.81 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1