Krone Comprima CF 155 XC - 8.8.3 Menu 1-3-3 Type of operation wrapper

KRONE ISOBUS Terminal
137
Pos: 48.92 /BA/Inf o-Center/CCI-I SOBUS-Terminal/CCI-Pr ess-Wickelvorric htung/Hauptmenüs/ Hauptmenü 1 Einstellungen/ Menü 1-3-3 Bedienar t Wrapper @ 53\mod_12899041 87546_78.docx @ 506778 @ 33 @ 1
8.8.3 Menu 1-3-3 Type of operation wrapper
CC000274
1-3-3
n
+
n
-
AUT O
AUT O
mm
1-3-3
CC000762
AUTO
Fig. 99
Displaying the menu
Menu 1-3 "Wrapper setting" is called.
• You can select menu 1-3-3 (
AUTO
) by pressing function key or . The symbol is
highlighted in grey.
• Press function key
.
The display shows menu 1-3-3 "Type of operation for wrapper".
The current status is displayed as an icon:
= Automatic start of transfer with wrapping
= Manual start of transfer with wrapping
= Manual start of transfer without wrapping
= Automatic start of transfer without wrapping
Change and save status
• Set the desired number of layers via function key
or .The symbol in the upper
line goes out.
• Press function key
.
The symbol
in the upper line indicates that the displayed value is saved.
• Use softkey DEF to reset the operating mode to the factory setting.
• Pressing the function key
closes the called up menu.
• Pressing the function key longer
and holding it down brings up the basic screen.
Pos: 48.93 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0. docx @ 4165 @ @ 1