KRONE ISOBUS Terminal
157
Pos: 48.133.1 /Übersc hriften/Überschr iften 3/F-J/Höhe W ickler in Parkposition fahr en @ 214\mod_13905553642 22_78.docx @ 1757830 @ 3 @ 1
8.12.2 Drive Height Wrapping Arm Into Parking Position
Pos: 48.133.2 /BA/I nfo-Center/CCI- ISOBUS-Terminal/CCI -Press-Wickelvorri chtung/Hauptmenüs/ Hauptmenü 1 Einstell ungen/Hinweis: Vor Antritt der Sraßenfahr t muss der Wickelarm in Parkposi tion gefahren werde n. @ 214\mod_1390556870 584_78.docx @ 1758599 @ @ 1
Note
Before starting road travel, move wrapping arm into parking position.
Pos: 48.133.3 /BA/I nfo-Center/CCI- ISOBUS-Terminal/CCI -Press-Wickelvorri chtung/Hauptmenüs/ Hauptmenü 1 Einstellunge n/Höhe Wickler in Parkposition fahren_ Teil 1 @ 214\mod_1390554042 431_78.docx @ 1757653 @ @ 1
If the wrapping arm is:
• not in the parking position
• if there is no bale on the wrapping table or
• if the work sequence is complete,
the function button
"Wrapping arm in parking position" is displayed on the home screen
Fig. 119
• Pressing the function button
moves the wrapping arm to the parking position.
Pos: 48.133.4 /BA/I nfo-Center/CCI- ISOBUS-Terminal/CCI -Press-Wickelvorri chtung/Hauptmenüs/ Hauptmenü 1 Einstell ungen/Hinweis: Zum Einl egen neuer Folienrol len oder wenn die Befüllung der Presskammer länger dau ert @ 214\mod_139055843398 3_78.docx @ 1758688 @ @ 1
Note
To insert new film rolls or if the filling of the bale chamber takes longer, the wrapping arm can
be moved to the parking position when the bale has been put down by pressing the function
button
. Before ejecting the next bale, the wrapping arm automatically moves to the
wrapping position.
Pos: 48.133.5 /Layout Module /---------------Seitenumbruch----------- ----- @ 0\mod_1196175311226_ 0.docx @ 4165 @ @ 1
To Next Page
Loading...
Need help?
General
